Kitchen Cabinet Installation in Maple Grove, MN | Custom Cabinet Solutions
Maple Grove Custom Kitchens provides professional cabinet installation requiring careful measuring, secure fastening, and precise adjustments. We install base cabinets, wall cabinets, pantry cabinets, and islands by locating wall studs, leveling each unit with shims, and fastening it securely so doors and drawers work smoothly. Our crew also handles filler strips, toe kicks, crown molding, and end panels for a clean, finished look. We check cabinet alignment with countertops, sinks, and appliances so everything fits properly once the work is done. Our guide explains cabinet door, drawer, hardware, trim, and millwork installation, along with the steps in our process and the costs to plan for. This includes hinges, drawer slides, soft-close hardware, and pulls or knobs. You'll know what the work involves and what to check before your kitchen project begins.
Kitchen cabinet installation services can include planning, measuring, delivery, and fitting. We recommend confirming which tasks the installer handles, since service packages vary. Installers can fit base cabinets along the floor and wall cabinets above counters. They may also remove old cabinets, level and secure new units, adjust doors and drawers, and add trim or hardware.
For a tailored layout, some companies design and install custom cabinets. Other options include ready-made cabinets, cabinet repairs, refacing, or refinishing. Ask for an itemized estimate that lists labor, materials, removal, and any extra work.
Before hanging the doors, our Maple Grove Custom Kitchens experts check that each cabinet box sits level and square. The Maple Grove Custom Kitchens team also confirms that the doors match the openings and marks each door’s location, especially if their sizes differ.
Attach the hinges to the doors first, following the hinge maker’s instructions. Set each door in its opening, then fasten the hinges to the cabinet frame. Keep the gaps even along the sides and between neighboring doors.
For concealed hinges, use the adjustment screws to shift the door up, down, in, or out. Tighten the screws after you align the doors, and open and close each one to check for rubbing.
Install handles or knobs after the doors hang straight. Measure and mark each hardware location, then drill from the front with a backing block behind the door to help prevent splintering. Test the door again once the hardware is secure.
Measure each cabinet opening for width, height, and depth before choosing drawers. Check the cabinet interior for obstructions, and confirm that the drawer box and its hardware will fit with enough clearance.
Choose drawer slides that match the drawer’s size and weight. Follow the slide maker’s instructions for placement, since side-mount and undermount slides attach differently. Use a level to keep each pair aligned and secure the slides with the specified screws.
Insert the drawer and test its movement. Adjust the slides or mounting points if the drawer rubs, sits unevenly, or fails to close smoothly. Install the drawer front last, leaving even gaps around it.
Trim gives cabinets a finished edge and helps cover small gaps. Common options include crown molding along the top, light rail molding under wall cabinets, toe kicks at the base, and filler strips between cabinets and walls.
Before cutting, measure each run and check that cabinets sit level and square. Mark the trim in place, then cut and dry-fit each piece. For corners, use the joint style and cut angle that suit the molding’s profile.
Attach trim with finish nails or screws suited to the cabinet material. Keep fasteners short enough to avoid piercing the cabinet’s visible surfaces. Fill nail holes and small joints, then sand and paint or stain to match.
Crown molding needs extra care because its position and angle affect each cut. Maple Grove Custom Kitchens recommends testing cuts on scrap pieces first, especially where walls or ceilings are uneven.
Maple Grove Custom Kitchens begins by checking the room, wall surfaces, and cabinet dimensions. Our installation crew marks a cabinet layout line to guide placement, then uses a stud finder to locate solid points for fastening each cabinet.
Our Maple Grove Custom Kitchens installers secure upper cabinets first to wall studs. A cabinet jack supports each unit during positioning and fastening to keep the cabinet steady as we check its height and alignment.
Next, the Maple Grove Custom Kitchens team installs base cabinets, starting at a corner or another fixed point in the layout. Our technicians level and shim each cabinet, then fasten the units together and to the wall. Careful checks help keep the cabinets aligned for countertop fitting.
Maple Grove Custom Kitchens finishes by adjusting doors and drawers, attaching hardware, and verifying that each cabinet opens and closes smoothly.

Maple Grove Custom Kitchens begins by checking the room, wall surfaces, and cabinet dimensions. Our installation crew marks a cabinet layout line to guide placement, then uses a stud finder to locate solid points for fastening each cabinet.
Our Maple Grove Custom Kitchens installers secure upper cabinets first to wall studs. A cabinet jack supports each unit during positioning and fastening to keep the cabinet steady as we check its height and alignment.
Next, the Maple Grove Custom Kitchens team installs base cabinets, starting at a corner or another fixed point in the layout. Our technicians level and shim each cabinet, then fasten the units together and to the wall. Careful checks help keep the cabinets aligned for countertop fitting.
Maple Grove Custom Kitchens finishes by adjusting doors and drawers, attaching hardware, and verifying that each cabinet opens and closes smoothly.
Cabinet installation costs depend on cabinet type, kitchen size, labor rates, and the work included. For a full kitchen, 2026 estimates range from about $4,000 to $15,000 installed. Labor alone can cost $2,000 to $10,000 for a common project.
These ranges overlap because prices vary by location, cabinet design, and project details. Removing old cabinets, adding trim or hardware, and changing plumbing or electrical lines can raise the total.
To compare estimates, check whether each quote includes cabinets, installation labor, removal, and finishing. A per-cabinet calculator can help with an early estimate, though a contractor’s quote will reflect your kitchen’s measurements and site conditions.
Project scope
| Typical planning range
|
|---|---|
Stock
| $100–$400 |
Semi-custom
| $150–$700 |
Custom
| $500–$1,200 or more |
Labor costs vary by location, kitchen size, and cabinet type. Installers may charge by the cabinet, by the hour, or for the full project. Our Maple Grove Custom Kitchens experts provide written estimates that list labor, removal of old cabinets, and any wall or floor repairs.
Yes. You can install cabinets yourself if you have the right tools, help lifting heavy units, and experience with accurate measuring and leveling. The work requires fastening cabinets to wall studs and keeping them aligned. Maple Grove Custom Kitchens recommends hiring a professional if the walls need major repairs or the layout requires complex cuts.
Installers drive cabinet screws through the cabinet’s mounting rails and into wall studs. They use a level and shims to keep each cabinet plumb and aligned, then join neighboring cabinets through their side panels. Use screws made for cabinet installation, and confirm their length suits the cabinet and wall.
Remove old cabinets, clear the work area, and check that the walls and floor are sound. Mark the cabinet layout, locate and mark wall studs, and note the positions of plumbing, outlets, and appliances. Measure the high point of the floor, since it affects the height of the base cabinets.
A small, straightforward kitchen may take one to three days to install. Larger kitchens, custom cabinets, uneven walls, or repair work can add time. Countertops, trim, and final door adjustments may need separate work.
Install the upper cabinets first. This leaves open space below for a ladder and tools, which makes it easier to lift and secure the cabinets. Mark their height and confirm they will clear appliances before fastening them to the wall.

Get a Free Quote!