Kitchen Sink Installation in Maple Grove, MN | Professional Sink Installation

Maple Grove Custom Kitchens installs kitchen sinks by securing the basin to the countertop, sealing the edges, and connecting the faucet and drain. The exact installation steps depend on the sink style, countertop material, and existing plumbing.

Our Maple Grove Custom Kitchens experts explain how undermount and farmhouse sinks differ, what faucet and drain work involves, and what affects installation costs in Maple Grove, MN. Use these details to plan your project and decide when to call a professional.

Why Choose Us for Kitchen Sink Installation in Maple Grove, MN

Kitchen sink installation in Maple Grove, MN requires tight plumbing connections and precise countertop fitting to prevent leaks. Maple Grove Custom Kitchens installs sinks that work flawlessly from the first use.


  • Many sink styles: We install undermount, farmhouse apron-front, drop-in, and workstation sinks in stainless steel, fireclay, and composite granite.
  • Licensed plumbing: Plumbing connections meet Minnesota plumbing code requirements.
  • Countertop coordination: Our team works with fabricators so sink cutouts and faucet holes line up exactly.
  • Leak testing: Every drain, supply line, and garbage disposal connection is tested before we leave.

Our Kitchen Sink Installation Services

We install new kitchen sinks by removing the old fixture, checking the cabinet and countertop opening, and fitting the replacement. Our service can include mounting the sink, sealing its edges, connecting the faucet and drain, and checking for leaks.

Before work begins, we confirm the sink type, size, and countertop material. Changes to a stone countertop, such as cutting a larger opening, may require a specialist Our service can also include haul-away of the old sink when arranged in advance. We explain the work and any extra costs before installation starts.

Undermount Kitchen Sink Installation

An undermount sink attaches beneath the countertop, leaving the counter edge exposed around the basin. Before installation, Maple Grove Custom Kitchens specialists recommend confirming that the countertop material supports this type of sink and that the cutout matches the sink’s size and shape.

If you are replacing a sink, remove the old basin and clean the underside of the counter. Dry-fit the new sink, then install a support frame or sink clips as directed by the manufacturer. The sink must stay supported while the adhesive cures.

Apply a continuous bead of silicone caulk around the sink flange, press the sink into place, and secure it with the specified clips or supports. Wipe away excess caulk, then let it cure for the time listed on the product label before connecting the drain and using the sink. Use safety glasses and follow the sink and countertop manufacturers’ instructions.

Farmhouse and Apron-Front Sink Installation

Farmhouse sinks need a cabinet and support system designed for their size and weight. Before buying a sink, check its width, depth, apron height, and installation instructions against your cabinet and countertop.

A purpose-built sink base can support the basin, but some models need extra framing. For a retrofit, the Maple Grove Custom Kitchens team recommends checking the cabinet’s condition and adding sturdy support before setting the sink in place. The sink should rest on its supports, not hang from the countertop.

Measure and mark the cabinet opening carefully. Cut the cabinet front to fit the apron, following the sink maker’s template and keeping the edges level. Measure twice before cutting, since the apron and sink rim need to align with the cabinet and countertop.

Dry-fit the sink before applying sealant or connecting plumbing. Confirm that it sits level, the drain lines up, and the faucet and water supply lines remain accessible. Then seal the sink-to-countertop joint as directed, connect the drain, and check for leaks.

Kitchen Faucet Installation

Before installing the sink, check that the faucet fits its mounting holes and clears nearby cabinets and the backsplash. Match the faucet’s number of mounting holes to the sink or countertop, and follow the manufacturer’s instructions for the model.

Set the faucet in place with its gasket or seal, then tighten the mounting nuts from below. Connect the hot and cold supply lines to the matching shutoff valves. Keep the lines free of kinks, and avoid overtightening the fittings.

Turn on the water slowly and check each connection for leaks. Run both handles, if present, and test the sprayer. Our Maple Grove Custom Kitchens technicians recommend checking again after a few minutes, when water pressure has built up.

If you plan to add a soap dispenser, confirm that the sink or countertop has an extra hole. Install it before the sink becomes hard to reach, and tighten its mounting hardware from below.

Kitchen Sink Drain and Plumbing Connection

Maple Grove Custom Kitchens starts by fitting the basket strainer into the sink drain opening. Roll plumber’s putty into a thin rope and press it around the underside of the strainer flange. Insert the strainer, then tighten its locknut from below until it sits firmly. Wipe away putty that squeezes out.

Attach the sink tailpiece to the strainer outlet, using the washer and nut supplied with the fitting. Connect the tailpiece to the drain line with a P-trap, which holds water to block sewer gases. Align the parts without forcing them, then hand-tighten slip-joint nuts and snug them with pliers.

Use PVC pipe and compatible fittings if the existing drain line needs an extension or adjustment. Cut pipe square, remove rough edges, and follow the cement maker’s directions for any glued joints. Keep the trap and drain line aligned, and follow local plumbing rules for venting and drain connections.

Run water into the sink and check each joint for leaks. Tighten a loose slip nut slightly, then test again. Use the washer specified for each connection, since placing a washer in the wrong position can keep the strainer from seating correctly.

Our Kitchen Sink Installation Process

Before installing a kitchen sink, the Maple Grove Custom Kitchens team measures the cabinet opening and checks the sink’s template against the countertop. Our technicians shut off the water, disconnect the supply lines and drain, then remove the old sink.

For a top-mount sink, Maple Grove Custom Kitchens specialists place the template on the counter and mark the cut line. If the counter needs a new opening, our installers drill a starter hole and cut along the line with a jigsaw before dry-fitting the basin and securing the clips.

For an undermount sink, our Maple Grove Custom Kitchens experts attach the sink to the underside of the countertop with specified mounting hardware and sealant. This installation requires extra support while the sealant cures.

Our Maple Grove Custom Kitchens installers connect the faucet, drain, and water supply lines according to manufacturer specifications. Then our technicians turn the water on, run the faucet, and inspect each connection for leaks.

How Much Does Kitchen Sink Installation Cost in Maple Grove, MN?

Kitchen sink installation in Maple Grove often falls within a broad range. A national estimate puts the typical cost at $280 to $1,400, including the sink, materials, and labor. The final price depends on sink type, material, plumbing changes, and how much work the existing counter needs.


A like-for-like replacement may cost less if the new sink fits the current opening and the plumbing needs no changes. Undermount sinks, counter alterations, new faucets, or repairs to drain lines can raise the total. Local quotes can also vary by installer and project scope.

The Maple Grove Custom Kitchens team recommends requesting itemized quotes from at least two local plumbers or sink installers. Ask each one to list the sink, faucet, labor, disposal, plumbing work, and any permit fees separately, then confirm the warranty and site conditions before you approve the price.

Cost item
Typical range
New sink

$50–$750

Replacement labor

$230–$650

Full installation

$280–$1,400

Why Choose Maple Grove Custom Kitchens


  • 23 years of remodeling experience: Our team brings over two decades of experience planning and completing kitchen renovations for homeowners.
  • Minnesota licensed residential remodeler: We maintain the required Minnesota Residential Remodeler license for qualifying residential remodeling work.
  • Complete project coordination: We coordinate cabinetry, plumbing, electrical work, ventilation, countertops, and installation around one remodeling plan.
  • Detailed planning and communication: Homeowners receive clear estimates, project schedules, and regular updates from design through installation.
A kitchen with white cabinets and marble counter tops

Get a Free Quote!

Kitchen Sink Installation FAQs

How much does it cost to install a kitchen sink?

A basic replacement often costs about $200 to $600 for labor, with the sink and supplies adding to the total. Costs rise if you need a new countertop cutout, drain lines, faucet, or garbage disposal connection. Our Maple Grove Custom Kitchens experts recommend getting a written estimate that itemizes labor, parts, and any extra work before starting.

Can I install a kitchen sink myself, or do I need a plumber?

You can replace a drop-in sink yourself if the new sink fits the existing opening and the water and drain connections stay in place. The job requires shutting off the water, removing the old sink, sealing and securing the new one, and checking for leaks. The Maple Grove Custom Kitchens team recommends hiring a professional if you need to alter pipes, move supply lines, or install an undermount sink that requires reinforced countertop support.

How do you connect the plumbing for a new kitchen sink?

Maple Grove Custom Kitchens connects the faucet supply lines to the hot and cold shutoff valves, then attaches the drain basket and tailpiece beneath the sink. Our installers connect the P-trap to the tailpiece and wall drain, keeping the trap aligned without forcing the pipes. Our Maple Grove Custom Kitchens technicians follow the fixture instructions and use the washers supplied with the drain parts. We turn the water on slowly and check every joint for leaks while water runs.

What is the process for installing an undermount kitchen sink?

An undermount sink attaches beneath the countertop, so the counter needs a smooth, finished cutout and strong support. Maple Grove Custom Kitchens specialists dry-fit the sink, apply the specified sealant, and secure the basin with heavy-duty clips or a support frame. Our Maple Grove Custom Kitchens installers let the sealant cure fully before connecting the plumbing or using the sink. Stone and other heavy countertops often require professional installation to protect the counter and hold the sink securely.

What tools and materials are needed to install a kitchen sink?

Common tools include an adjustable wrench, pliers, screwdriver, utility knife, tape measure, bucket, and safety glasses. A drain wrench can help loosen or tighten the drain basket locknut in a tight space. Our Maple Grove Custom Kitchens professionals also use plumber’s putty or silicone sealant, a new drain assembly, supply lines, and mounting clips. We verify the sink maker’s instructions because some sinks require specific sealants or hardware.

How long does it take to install a kitchen sink?

A straightforward replacement can take about two to four hours if the new sink fits the existing opening and the plumbing needs no changes. Maple Grove Custom Kitchens advises allowing additional time if you need to remove a garbage disposal, adjust pipe routing, or modify the countertop.